MO13
Precision cast and machined surface mount powered canopy for low voltage and line voltage lighting fixtures. Can be used for wall or ceiling mounted lighting applications.
- Thick walled metal housing prevents ‘sag’ of fixture mounted to it.
- Choice of 1/2” NPS threaded or 7/8” non-threaded mount hole.
- Gaskets on base and cover and O-ring groove at mount hole provides a water tight housing.
- Cover alignment pins and captive cover screws for quick installation and easy maintenance.
- Can be mounted over a 4/0 junction box or used as a surface mount box.
-
Product Details
WRITTEN SPECIFICATIONS
Canopy Base:
Canopy Base made from cast 356 aluminum or cast C84400 bronze. Bronze models available with as-cast or machined finish. Base allows for mounting to the wall as a surface mount box (base mounting hardware not included).
Canopy Cover:
Thick walled cast 356 aluminum or cast C84400 bronze canopy cover prevents deflection and ‘sag’ of mounted fixtures. Bronze models available with as-cast or machined finish. Canopy cover available with single or dual fixture mounting holes. Non-threaded mounting hole option allows for versatility, while the threaded mounting hole option can be used for maximum strength (threaded mount hole option requires the use of a fixture with the ‘Rotate and Lock Knuckle’). Canopy cover mounts to the canopy base with four 18-8 stainless steel captive screws, which are retained by the cover. Captive screws prevent loss of screws, and provides for safe and easy installation. Captive screw heads are sized the same as the knuckle adjustment screws on Vision3 Lighting flood fixtures, requiring only one tool for installation and adjustment. Alignment pins orient the canopy cover with the canopy base, simplifying installation by ensuring that the cover screws are always lined up properly.
Seals:
O-ring groove on canopy cover allows for use of an O-ring to prevent leaking between canopy cover and fixture knuckle. (All Vision3 flood fixtures come with a high temperature, black Viton O-ring on the knuckle for this purpose). High temperature foam silicone gaskets prevent leaking between the canopy cover, canopy base, and mounting surface. (Canopy base gasket may not work properly if mounting surface is too rough).
Electrical:
120/230/277V, 75VA or 120/277V, 150VA 11.6 Volt output, electronic transformer is mounted to the canopy base with 18-8 stainless steel hardware. Also available without transformer.
Finish:
TGIC thermo set polyester powder coat paint available in 14 standard colors. On aluminum model, finish is applied over a corrosion resistant, hexavalent chromium free, RoHS compliant coating. Aluminum model available in one additional metal finish: Clear Anodized. Bronze model available in three additional metal finishes: Natural, Polished, and Aged (Cast finish bronze not available in Polished finish).
Certification:
CSA tested & certified to US and Canadian safety standards for the following applications:
Wet location wall mount use (UL1598):
MO13(A, B, or C) - 150W Max. -
Resources
Downloads
Name File size MO13 Specification Sheets 372.5 KB MO13 Installation Instructions 370.8 KB Photometry
-
WRITTEN SPECIFICATIONS
Canopy Base:
Canopy Base made from cast 356 aluminum or cast C84400 bronze. Bronze models available with as-cast or machined finish. Base allows for mounting to the wall as a surface mount box (base mounting hardware not included).
Canopy Cover:
Thick walled cast 356 aluminum or cast C84400 bronze canopy cover prevents deflection and ‘sag’ of mounted fixtures. Bronze models available with as-cast or machined finish. Canopy cover available with single or dual fixture mounting holes. Non-threaded mounting hole option allows for versatility, while the threaded mounting hole option can be used for maximum strength (threaded mount hole option requires the use of a fixture with the ‘Rotate and Lock Knuckle’). Canopy cover mounts to the canopy base with four 18-8 stainless steel captive screws, which are retained by the cover. Captive screws prevent loss of screws, and provides for safe and easy installation. Captive screw heads are sized the same as the knuckle adjustment screws on Vision3 Lighting flood fixtures, requiring only one tool for installation and adjustment. Alignment pins orient the canopy cover with the canopy base, simplifying installation by ensuring that the cover screws are always lined up properly.
Seals:
O-ring groove on canopy cover allows for use of an O-ring to prevent leaking between canopy cover and fixture knuckle. (All Vision3 flood fixtures come with a high temperature, black Viton O-ring on the knuckle for this purpose). High temperature foam silicone gaskets prevent leaking between the canopy cover, canopy base, and mounting surface. (Canopy base gasket may not work properly if mounting surface is too rough).
Electrical:
120/230/277V, 75VA or 120/277V, 150VA 11.6 Volt output, electronic transformer is mounted to the canopy base with 18-8 stainless steel hardware. Also available without transformer.
Finish:
TGIC thermo set polyester powder coat paint available in 14 standard colors. On aluminum model, finish is applied over a corrosion resistant, hexavalent chromium free, RoHS compliant coating. Aluminum model available in one additional metal finish: Clear Anodized. Bronze model available in three additional metal finishes: Natural, Polished, and Aged (Cast finish bronze not available in Polished finish).
Certification:
CSA tested & certified to US and Canadian safety standards for the following applications:
Wet location wall mount use (UL1598):
MO13(A, B, or C) - 150W Max. -
Downloads
Type Name File size MO13 Specification Sheets 372.5 KB MO13 Installation Instructions 370.8 KB