IG5 MR16 Sealed Ingrade

MR16 Sealed Ingrade

Precision cast and machined lighting fixture for MR16 halogen lamps or integral LED lamp module with driver. Designed for in ground installation and landscape up lighting applications. Rugged cast bronze construction is suitable for the most corrosive of environments. Integral magnetic transformer.

  • IP68 rated. Optional pour collar is suitable for concrete pour applications. Drive-over rated.
  • Faceplates available in three metal choices and eight styles with tamper-proof, captive screws.
  • Replaceable tempered 1/4” thick glass lens and silicone lens gasket.
  • Exclusive ‘Joystick Aiming’ option that provides hot-aiming convenience.
  • Quick disconnects on all wiring connections for easy installation and maintenance.
  • LED modules are field replaceable and feature replaceable lenses.
  • LED drivers utilize dynamic transformer recognition to simplify installation and patented LEDSense® thermal management to keep LED running at the optimum temperature.


    Cast C84400 bronze housing in two depths: Standard (STD) and short (SH). Four 3/4” NPT conduit entries allow for side entry or bottom entry conduit connection. Water tight pass-thru prevents water from entering the housing in the event of the wiring compartment becoming temporarily flooded. IP68 rated to a depth of 1 ft. for 60 hours. Optional concrete pour collar available in material and finish to match the faceplate.


    Available in cast or machined C84400 bronze or machined 316 stainless steel. Attaches using six 18-8 stainless steel captive screws. Optional Glare Shield, Half Dome, Marker Light, and Rock Guard faceplates available in cast C84400 bronze and allow 360° of rotational alignment. Optional Flanged faceplate available in machined brass or 316 stainless steel.


    Tempered, 1/4” thick, stepped lens allows for flush mounting. Optional Slip Reduction Lens increases wet lens friction by over 50%. Molded, high temperature, silicone lens gasket compresses around lens between faceplate and housing for a water tight seal. Both lens and seal are removable for cleaning or replacement.


    Available in 14 standard TGIC thermo set polyester powder coat paint colors. Cast Bronze faceplates available in two additional finishes: Natural and Aged. Machined Brass faceplates available in three additional finishes: Natural, Aged, and Polished. Machined Stainless faceplates available in three additional finishes: Natural, Brushed, and Polished. Optional pour collar finished to match faceplate.


    Optional mount stand, with or without grout mask, can be used as a stand alone installation mount or tied to a rebar grid for easy mounting and alignment.


    GY-6.35 porcelain socket with 600V, 250°C, PTFE coated 18 ga leads.

    Lamp Module & Aiming:

    MR16 Halogen: Standard Aiming Lamp Module allows for 22° vertical and 360° horizontal aiming. Joystick Aiming Lamp Module allows for one tool ‘hot aiming’ with 18° vertical and 360° horizontal adjustment without having to touch hot brackets or lamp. Optional accessory holder accepts up to two lens options.

    Integral & Retrofit LED: LED lamp module uses black anodized aluminum bracketry for maximum heat transfer away from LED to ensure long life while allowing for one tool ‘hot aiming’ with 18° vertical and 360° horizontal adjustment. Integral accessory holder accepts up to two lens options.


    MR16 Halogen: 12V bi-pin up to 42W (See Certification heading).

    Integral LED: 12-24V AC/ DC 6W (400lm) or 12V AC/ DC 10W (700lm) LED options include integral driver with High/ Low switch for 35W/20W (6W) or 50W/35W (10W) halogen equivalent outputs. LED Modules are field replaceable and feature replaceable lenses, an L70 > 60,000 hrs., dynamic transformer recognition, phase dimming (see Transformer and Dimmer Compatibility List), and patented LEDSense® thermal management.

    Retrofit MR16 LED: 12V 7.5W (600lm) bi-pin retrofit Soraa™ MR16 LED lamp with specially engineered heat sink mount to ensure proper heat transfer to housing. Note: Retrofit LED will overheat without supplied heat sink mount.

    Power Module:

    Power module is constructed of black anodized 6061-T6 aluminum, 304 stainless steel, and 18-8 stainless steel hardware. Integral handle and quick disconnects allows easy removal and replacement of module.


    IP68 rated to a depth of 1 ft. for 60 hours. Drive over durable for up to 5300 lb vehicles, at up to 10 mph (‘STD’, ‘ML1’, ‘ML2’, or ‘ML4’ faceplates only. Other faceplate options are not suitable for drive over applications). CSA tested & certified to US and Canadian safety standards for the following applications:
    Wet location landscape use (UL1598):
    IG5 - 42W Max. MR16 Halogen lamp.

    LED options can be used in all models and applications.

  • Photometry

  • Photos