MO3 Machined Round Canopy

Machined Round Canopy

Precision machined round canopy for mounting lighting fixtures on a 4/0 junction box. Can be used for wall or ceiling mounted accent lighting applications.

  • Choice of single or dual fixture mounting holes.
  • Choice of 1/2” NPS threaded or 7/8” non-threaded mount hole(s).
  • Each mount hole has an O-ring groove that, in conjunction with the O-ring supplied with all Vision3 lighting fixtures, creates a water tight fixture mount.
  • Single mount hole option comes with universal mounting ring and stainless steel hardware for adjusting orientation of canopy.


    Precision machined from aluminum, brass, or stainless steel.


    Single or dual mount hole options available. Mount holes available as 7/8” diameter slip fit or threaded 1/2” NPS. Each hole has an O-ring groove to fit the O-ring supplied with all Vision3 fixtures for a water tight mount. Single fixture canopies come with a universal mounting ring so that the canopy can be adjusted to align mounting screws as desired during installation. Double fixture canopies have the screw holes oriented at a 45º angle so that the fixtures will be horizontal when mounted on a normal 4/0 junction box.


    14 standard powder coat finishes, clear anodized aluminum finish, 3 brass finishes and 3 stainless steel finishes available.


    CSA tested and certified to US and Canadian safety standards for use in wet locations.

  • Downloads

    Type Name File size
    MO3 Specification Sheets 341.5 KB
    MO3 Installation Instructions 354.3 KB