Thick walled cast C84400 bronze housing attaches to mount base using black oxide coated 18-8 stainless steel hardware.
Machined C36000 brass mount base comes in two styles: Surface Mount and Stake Mount.
Cast C84400 bronze faceplate is pressed on to a machined, black anodized, 6061-T6 aluminum cap, which is attached to the lamp holder (see below). Seal between cap and faceplate is a high temperature silicone O-ring. A 1/8” thick, tempered, clear lens, is secured to the faceplate with a high temperature, UV curing, silicone adhesive for a water tight seal. The faceplate accepts two internal lens accessories, held in place by a stainless steel clip.
Cast C84400 bronze cover comes in two cutoffs. A 1/8” thick, Ø2 1/2” spread lens is secured to the cover and allows maximum light output and distribution. The cover is mounted to the faceplate using three 18-8 stainless steel set screws. The cover can be mounted on the faceplate and rotated to align, as desired.
The machined 6061-T6 aluminum, black anodized lamp holder contains the socket and lamp, and attaches to the faceplate cap using one 18-8 stainless steel set screw.
TGIC thermo set polyester powder coat paint available in 14 standard colors. Available in two additional metal finishes: Natural and Aged.
GY-6.35 porcelain socket with 600V, 250°C, PTFE coated 18 ga leads.
MR16 Halogen: 12V bi-pin up to 50W (See Certification heading).
Integral LED: 12-24V AC/DC 6W (400lm) or 12V AC/ DC 10W (700lm) LED options include integral driver with High/Low switch for 35W/20W (6W) or 50W/35W (10W) halogen equivalent outputs. LED Modules are field replaceable and feature replaceable lenses, an L70 > 60,000 hrs., dynamic transformer recognition, phase dimming (see Transformer and Dimmer Compatibility List), and patented LEDSense® thermal management.
Retrofit MR16 LED: 12V 7.5W (600lm) bi-pin retrofit Soraa™ MR16 LED lamp with specially engineered heat sink mount to ensure proper heat transfer to body.
CSA tested & certified to US and Canadian safety standards for the following applications:
Wet location landscape use (UL1838):
PA7B - 50W Max. MR16 Halogen lamp.
Caution! - Higher wattage lamps may be unacceptable or harmful in certain applications. Consult the surface temperature table on the specification sheet before choosing a lamp suitable for your application. LED options can be used in all models and applications.