Precision cast and machined lighting fixture for T4 and PAR20 metal halide lamps. Designed for in ground installation and landscape up lighting applications. Rugged cast bronze construction is suitable for the most corrosive of environments. Integral magnetic and electronic ballast options.
Cast bronze housing with brass, bronze, or stainless steel faceplate. All stainless steel hardware.
1/4” thick tempered glass lens machined with stepped profile for flush mounting. Silicone gasket seal compresses around lens when faceplate is installed, creating a water tight seal. Lens and seal are both cleanable and replaceable. Optional Slip Reduction Lens increases wet lens friction by over 50%.
Four 3/4” NPT conduit entries for side or bottom conduit connections. Over-sized wiring compartment for easy installation. Water-tight pass-thru from wiring box to housing.
39W PAR20 or 20W T4 metal halide lamp. Lamp optional. Lamp module uses quick disconnects for easy assembly.
14 standard powder coat finishes, 2 bronze finishes, 3 brass finishes & 3 stainless steel finishes.
Black anodized aiming module with stainless steel bracket provides up to 22° of vertical aiming (18° with Joystick Aiming option) and 360° of rotational aiming. Joystick aiming option allows for hot aiming.
Integral 39W multi-tap magnetic ballast or 20W universal voltage electronic ballast. Modular design with quick disconnects for easy installation.
CSA tested and certified to US and Canadian safety standards for use in wet locations.
Name | Size | |
---|---|---|
IES Files | 934 bytes | |
Specification Sheets | 582.8 KB | |
Installation Instructions | 1.1 MB |
Cast bronze housing with brass, bronze, or stainless steel faceplate. All stainless steel hardware.
1/4” thick tempered glass lens machined with stepped profile for flush mounting. Silicone gasket seal compresses around lens when faceplate is installed, creating a water tight seal. Lens and seal are both cleanable and replaceable. Optional Slip Reduction Lens increases wet lens friction by over 50%.
Four 3/4” NPT conduit entries for side or bottom conduit connections. Over-sized wiring compartment for easy installation. Water-tight pass-thru from wiring box to housing.
39W PAR20 or 20W T4 metal halide lamp. Lamp optional. Lamp module uses quick disconnects for easy assembly.
14 standard powder coat finishes, 2 bronze finishes, 3 brass finishes & 3 stainless steel finishes.
Black anodized aiming module with stainless steel bracket provides up to 22° of vertical aiming (18° with Joystick Aiming option) and 360° of rotational aiming. Joystick aiming option allows for hot aiming.
Integral 39W multi-tap magnetic ballast or 20W universal voltage electronic ballast. Modular design with quick disconnects for easy installation.
CSA tested and certified to US and Canadian safety standards for use in wet locations.
Name | Size | |
---|---|---|
IES Files | 934 bytes | |
Specification Sheets | 582.8 KB | |
Installation Instructions | 1.1 MB |